High Quality Serpentine Bending

Serpentine Data Sheet

 
Home> Products > Serpentines >Serpentine Data

 

Definition:
 Refrigeration condenser or Hot-wall Evaporator/ Condenser

Material:
See Tube Data Sheet

End Cut:
Standard ring cut

End Treatment:
 Swedge, optional
Expansion, optional

End Seal:
 Rubber caps

Tests & Inspection:
Form Gauge Inspection: Two [2] pieces per 20 - 25 piece lot are inspected using a form gauge to ensure correct dimensional characteristics. Moisture & Residue Tested.

Packaging:
Returnable condensers or corrugated Boxes

Standard Primary Bends: (Contact Indiana Tube Corporation for other requirements)

Bend

Tube Diameter:

Diameter:

0.1875” (4.76mm)

0.250” (6.35mm)

0.3125” (7.94mm)

0.375” (9.53mm)

1.000” (25.40mm)

X

X

 

 

1.250” (31.75mm)

X

X

 

 

1.500” (38.10mm)

X

X

X

 

1.575” (40.00mm)

X

 

 

 

1.625” (41.28mm)

X

 

 

 

1.750” (44.45mm)

X

X

 

 

1.953” (49.61mm)

X

 

 

 

2.000” (50.80mm)

X

X

 

X

2.250” (57.15mm)

X

X

 

 

2.276” (57.80mm)

 

 

 

X

2.312” (58.72mm)

 

 

 

X

2.500” (63.50mm)

X

 

 

 

2.562” (65.07mm)

X

 

 

 

2.750” (69.85mm)

 

X

 

 

2.799” (71.10mm)

 

 

 

X

3.500” (88.90mm)

X

 

 

 

Note:  Standard secondary bends of 0.500” (12.7mm) radius or 1.00” (25.4mm) radius.

 

Indiana Tube Corporation
2100 Lexington Avenue
Evansville, IN 47720
Phone:  812-424-9028 Fax:  812-424-0340

Site Map | Contact Us | Disclaimer

Indiana Tube Corporation is a subsidiary of Handy & Harman
Copyright© 2003-2006 Indiana Tube Corporation